189 research outputs found
TROUBLE 3: A fault diagnostic expert system for Space Station Freedom's power system
Designing Space Station Freedom has given NASA many opportunities to develop expert systems that automate onboard operations of space based systems. One such development, TROUBLE 3, an expert system that was designed to automate the fault diagnostics of Space Station Freedom's electric power system is described. TROUBLE 3's design is complicated by the fact that Space Station Freedom's power system is evolving and changing. TROUBLE 3 has to be made flexible enough to handle changes with minimal changes to the program. Three types of expert systems were studied: rule-based, set-covering, and model-based. A set-covering approach was selected for TROUBLE 3 because if offered the needed flexibility that was missing from the other approaches. With this flexibility, TROUBLE 3 is not limited to Space Station Freedom applications, it can easily be adapted to handle any diagnostic system
TROPIX Power System Architecture
This document contains results obtained in the process of performing a power system definition study of the TROPIX power management and distribution system (PMAD). Requirements derived from the PMADs interaction with other spacecraft systems are discussed first. Since the design is dependent on the performance of the photovoltaics, there is a comprehensive discussion of the appropriate models for cells and arrays. A trade study of the array operating voltage and its effect on array bus mass is also presented. A system architecture is developed which makes use of a combination of high efficiency switching power convertors and analog regulators. Mass and volume estimates are presented for all subsystems
Design and implementation of a status at a glance user interface for a power distribution expert system
Expert systems are widely used in health monitoring and fault detection applications. One of the key features of an expert system is that it possesses a large body of knowledge about the application for which it was designed. When the user consults this knowledge base, it is essential that the expert system's reasoning process and its conclusions be as concise as possible. If, in addition, an expert system is part of a process monitoring system, the expert system's conclusions must be combined with current events of the process. Under these circumstances, it is difficult for a user to absorb and respond to all the available information. For example, a user can become distracted and confused if two or more unrelated devices in different parts of the system require attention. A human interface designed to integrate expert system diagnoses with process data and to focus the user's attention to the important matters provides a solution to the 'information overload' problem. This paper will discuss a user interface to the power distribution expert system for Space Station Freedom. The importance of features which simplify assessing system status and which minimize navigating through layers of information will be discussed. Design rationale and implementation choices will also be presented
KELT-8b: A highly inflated transiting hot Jupiter and a new technique for extracting high-precision radial velocities from noisy spectra
We announce the discovery of a highly inflated transiting hot Jupiter
discovered by the KELT-North survey. A global analysis including constraints
from isochrones indicates that the V = 10.8 host star (HD 343246) is a mildly
evolved, G dwarf with K, , , an inferred mass
M, and radius
R. The planetary companion has mass , radius
, surface gravity , and density
g cm. The planet is on a roughly
circular orbit with semimajor axis AU and
eccentricity . The best-fit linear ephemeris is
BJD and
days. This planet is one of the most inflated of all known transiting
exoplanets, making it one of the few members of a class of extremely low
density, highly-irradiated gas giants. The low stellar and large
implied radius are supported by stellar density constraints from follow-up
light curves, plus an evolutionary and space motion analysis. We also develop a
new technique to extract high precision radial velocities from noisy spectra
that reduces the observing time needed to confirm transiting planet candidates.
This planet boasts deep transits of a bright star, a large inferred atmospheric
scale height, and a high equilibrium temperature of
K, assuming zero albedo and perfect heat redistribution, making it one of the
best targets for future atmospheric characterization studies.Comment: Submitted to ApJ, feedback is welcom
KELT-2Ab: A Hot Jupiter Transiting the Bright (V=8.77) Primary Star of a Binary System
We report the discovery of KELT-2Ab, a hot Jupiter transiting the bright
(V=8.77) primary star of the HD 42176 binary system. The host is a slightly
evolved late F-star likely in the very short-lived "blue-hook" stage of
evolution, with \teff=6148\pm48{\rm K}, and
\feh=0.034\pm0.78. The inferred stellar mass is
\msun\ and the star has a relatively large radius
of \rsun. The planet is a typical hot Jupiter with
period days and a mass of \mj\ and
radius of \rj. This is mildly inflated as compared
to models of irradiated giant planets at the 4 Gyr age of the system.
KELT-2A is the third brightest star with a transiting planet identified by
ground-based transit surveys, and the ninth brightest star overall with a
transiting planet. KELT-2Ab's mass and radius are unique among the subset of
planets with host stars, and therefore increases the diversity of bright
benchmark systems. We also measure the relative motion of KELT-2A and -2B over
a baseline of 38 years, robustly demonstrating for the first time that the
stars are bound. This allows us to infer that KELT-2B is an early K-dwarf. We
hypothesize that through the eccentric Kozai mechanism KELT-2B may have
emplaced KELT-2Ab in its current orbit. This scenario is potentially testable
with Rossiter-McLaughlin measurements, which should have an amplitude of
44 m s.Comment: 9 pages, 2 tables, 4 figures. A short video describing this paper is
available at http://www.youtube.com/watch?v=wVS8lnkXXlE. Revised to reflect
the ApJL version. Note that figure 4 is not in the ApJL versio
KELT-3b: A Hot Jupiter Transiting a V=9.8 Late-F Star
We report the discovery of KELT-3b, a moderately inflated transiting hot
Jupiter with a mass of 1.477 (-0.067, +0.066) M_J, and radius of 1.345 +/-
0.072 R_J, with an orbital period of 2.7033904 +/- 0.000010 days. The host
star, KELT-3, is a V=9.8 late F star with M_* = 1.278 (-0.061, +0.063) M_sun,
R_* = 1.472 (-0.067, +0.065) R_sun, T_eff = 6306 (-49, +50) K, log(g) = 4.209
(-0.031, +0.033), and [Fe/H] = 0.044 (-0.082, +0.080), and has a likely proper
motion companion. KELT-3b is the third transiting exoplanet discovered by the
KELT survey, and is orbiting one of the 20 brightest known transiting planet
host stars, making it a promising candidate for detailed characterization
studies. Although we infer that KELT-3 is significantly evolved, a preliminary
analysis of the stellar and orbital evolution of the system suggests that the
planet has likely always received a level of incident flux above the
empirically-identified threshold for radius inflation suggested by Demory &
Seager (2011).Comment: 12 pages, 12 figures, accepted to Ap
KELT-18b: Puffy Planet, Hot Host, Probably Perturbed
We report the discovery of KELT-18b, a transiting hot Jupiter in a 2.87-day orbit around the bright ( V = 10.1), hot, F4V star BD+60 1538 (TYC 3865-1173-1). We present follow-up photometry, spectroscopy, and adaptive optics imaging that allow a detailed characterization of the system. Our preferred model fits yield a host stellar temperature of K and a mass of , situating it as one of only a handful of known transiting planets with hosts that are as hot, massive, and bright. The planet has a mass of , a radius of , and a density of , making it one of the most inflated planets known around a hot star. We argue that KELT-18b’s high temperature and low surface gravity, which yield an estimated ∼600 km atmospheric scale height, combined with its hot, bright host, make it an excellent candidate for observations aimed at atmospheric characterization. We also present evidence for a bound stellar companion at a projected separation of ∼1100 au, and speculate that it may have contributed to the strong misalignment we suspect between KELT-18\u27s spin axis and its planet’s orbital axis. The inferior conjunction time is 2457542.524998 ± 0.000416 (BJD TDB ) and the orbital period is 2.8717510 ± 0.0000029 days. We encourage Rossiter–McLaughlin measurements in the near future to confirm the suspected spin–orbit misalignment of this system
KELT-6b: A P~7.9 d Hot Saturn Transiting a Metal-Poor Star with a Long-Period Companion
We report the discovery of KELT-6b, a mildly-inflated Saturn-mass planet
transiting a metal-poor host. The initial transit signal was identified in
KELT-North survey data, and the planetary nature of the occulter was
established using a combination of follow-up photometry, high-resolution
imaging, high-resolution spectroscopy, and precise radial velocity
measurements. The fiducial model from a global analysis including constraints
from isochrones indicates that the V=10.38 host star (BD+31 2447) is a mildly
evolved, late-F star with T_eff=6102 \pm 43 K, log(g_*)=4.07_{-0.07}^{+0.04}
and [Fe/H]=-0.28 \pm 0.04, with an inferred mass M_*=1.09 \pm 0.04 M_sun and
radius R_star=1.58_{-0.09}^{+0.16} R_sun. The planetary companion has mass
M_P=0.43 \pm 0.05 M_J, radius R_P=1.19_{-0.08}^{+0.13} R_J, surface gravity
log(g_P)=2.86_{-0.08}^{+0.06}, and density rho_P=0.31_{-0.08}^{+0.07}
g~cm^{-3}. The planet is on an orbit with semimajor axis a=0.079 \pm 0.001 AU
and eccentricity e=0.22_{-0.10}^{+0.12}, which is roughly consistent with
circular, and has ephemeris of T_c(BJD_TDB)=2456347.79679 \pm 0.00036 and
P=7.845631 \pm 0.000046 d. Equally plausible fits that employ empirical
constraints on the host star parameters rather than isochrones yield a larger
planet mass and radius by ~4-7%. KELT-6b has surface gravity and incident flux
similar to HD209458b, but orbits a host that is more metal poor than HD209458
by ~0.3 dex. Thus, the KELT-6 system offers an opportunity to perform a
comparative measurement of two similar planets in similar environments around
stars of very different metallicities. The precise radial velocity data also
reveal an acceleration indicative of a longer-period third body in the system,
although the companion is not detected in Keck adaptive optics images.Comment: Published in AJ, 17 pages, 15 figures, 6 table
- …